The active ingredients within Forcefield forms a colourless, odourless, positively charged polymer that molecularly bonds to the surface. The strong positive charge disrupts the cell membrane of microorganisms that come in contact with the active surface, thereby causing their cytoplasm and organelles to leak out. It resembles popping a water balloon. Because of this physical kill mechanism, Forcefield does not promote the development of multi-resistant superbugs.

Forcefield protection continuously fights the growth microbes such as germs, mould and COVID-19.  Forcefield’s protection also makes the surface easier to clean next  time, as the protective coating fills the micro pores of the surface.  

Yes, Once Forcefield’s technology dries and bonds to the surface,  generally constant harsh abrasion and bleach and alcohol based products will remove the protection, regularly test the surface with a test strip to see when a new Forcefield treatment is required.   

Forcefield is environmentally responsible as it is a water based solution. It does not contain any volatile organic compounds and is readily biodegradable.

Because Forcefield is continuously destroying germs, mould and COVID-19 that comes into contact with it, you still need  clean the surface to remove the dust, dirt and dead cell debris, but you only need a damp clean cloth

EN14476 COVID-19 Surrogate 

Quantitative suspension test for evaluation of virucidal activity in the medical area

TESTED ORGANISMS: Feline coronavirus 
REDUCTION: >99.99%
CONTACT TIME: 5min 

ASTM E1053 COVID-19 Surrogate 

Quantitative non-porous surface test for evaluation of virucidal activity in the medical area

TESTED ORGANISMS: Murine hepatitis
REDUCTION: >99.99%
CONTACT TIME: 5min 

EN16777 – 7 days COVID-19 Surrogate 

Assessment of the 7 day residual activity of a surface disinfectant using EN16777 chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of virucidal activity in the medical area. 

TESTED ORGANISMS: Human coronavirus 229E
REDUCTION: >99.99%
CONTACT TIME: 5min 

EN16777 – 30 days COVID-19 Surrogate 

Assessment of the 30 day residual activity of a surface disinfectant using EN16777 chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of virucidal activity in the medical area.

TESTED ORGANISMS: Human coronavirus 229E
REDUCTION: >99.99%
CONTACT TIME: 5min 

EN1276 

Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas (Phase 2 Step 1)

TESTED ORGANISMS: Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus hirae & Escherichia coli
REDUCTION: >99.999%
CONTACT TIME: 5min 

EN13624 

Chemical disinfectants and antiseptics — Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area – (phase 2, step 1)

TESTED ORGANISMS: Aspergillus brasiliensis ATCC & Candida albicans
REDUCTION: >99.99%
CONTACT TIME: 5min 

EN13697 

Chemical disinfectants and antiseptics – Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas (Phase 2, step2)

TESTED ORGANISMS: Pseudomonas aeruginosa 
REDUCTION: >99.999%
CONTACT TIME: 5min 

TESTED ORGANISMS: Staphylococcus aureus, Enterococcus hirae & Escherichia coli
REDUCTION: >99.99%
CONTACT TIME: 5min 

TESTED ORGANISMS: Aspergillus brasiliensis ATCC & Candida albicans
REDUCTION: >99.9%
CONTACT TIME: 15min 

EN13697 – 7 days 

Assessment of the 7 day residual activity of a surface disinfectant using chemical disinfectants and antiseptics – Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas (Phase 2, step2)

TESTED ORGANISMS: Pseudomonas aeruginosa
REDUCTION: >99.999%
CONTACT TIME: 5min

TESTED ORGANISMS: Staphylococcus aureus, Enterococcus hirae & Escherichia coli
REDUCTION: >99.99%
CONTACT TIME: 5min

TESTED ORGANISMS: Aspergillus brasiliensis ATCC & Candida albicans
REDUCTION: >99.9%
CONTACT TIME: 15min

EN13697 – 30 days 

Assessment of the 30 day residual activity of a surface disinfectant using chemical disinfectants and antiseptics – Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas (Phase 2, step2)

TESTED ORGANISMS: Pseudomonas aeruginosa
REDUCTION: >99.999%
CONTACT TIME: 5min

TESTED ORGANISMS: Staphylococcus aureus, Enterococcus hirae & Escherichia coli
REDUCTION: >99.99%
CONTACT TIME: 5min

TESTED ORGANISMS: Aspergillus brasiliensis ATCC & Candida albicans
REDUCTION: >99.9%
CONTACT TIME: 15min

EN13727 

Chemical disinfectants and antiseptics — Quantitative suspension test for the evaluation of bactericidal activity in the medical area — Test method and requirements (phase 2, step 1)

TESTED ORGANISMS: Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus hirae & Escherichia coli
REDUCTION: >99.999%
CONTACT TIME: 5min

Forcefield can reduce the visual effects of mould, but if the mould has grown through the surface because of for example a roof leak, Forcefield won’t remove the staining.
If the mould stained material is not structurally damaged, we recommend painting over the affected area. When the paint dries apply another coating of Forcefield on the area, this will leave a protective layer under the new paint and on top.

Yes, Forcefield has shown to be highly effective on all fabrics and leathers. You can even add Forcefield as a rinse aid within your washing machine to treat and protect your clothing.  Use 50mls for a 4kg or smaller machine and 100mls for a 5kg or larger machine.

Yes, use as if you would a normal spray and wipe product. When Forcefield dries if there are runs on the glass, spray the run with more Forcefield leave for 20 seconds and wipe with a clean microfiber cloth.

Preventing mould is a lot easier to achieve than decontaminating an existing mould issue.
Visible mould normally has grown within the surface it’s on, for example, timber, gyprock and concrete. Once the mould is within the surface, unless the material it is growing in is removed and replaced, all you can do is kill what is on the surface and protect against what is below.    
Under optimal moisture and ventilation conditions, this may be enough to stop the mould from coming back.

If you are wanting to know the species of mould in your property, you can order testing samples to do yourself or arrange to have someone do the testing for you. Typically DIY testing will cost $100 – $200 at minimum for 2-3 samples which you send to a mycologist company e.g. Eurofins. To have an expert conduct the tests for you starts at $300-$500 minimum. Although it is good to have the knowledge of what type of mould is in your property, we believe any visible mould contamination within a property is not a good thing and should be treated no matter the species.